Before a property developer signs for a site, two questions decide whether the project can be funded: what will a lender test in the property development feasibility, and how much money will the developer have to put in before the loan starts? Once the site contract goes unconditional, the developer is committed whether or not a lender agrees, so both answers come first.
Below we set out what goes into it, run a 12 apartment block in south east Queensland through five lender tests, then try a 5 per cent lower sale price.
What goes into a property development feasibility
Net revenue is the expected sale prices less GST and selling costs. A developer registered or required to be registered for GST generally pays one eleventh of each price as GST on a sale of new residential premises, or one eleventh of the margin under the margin scheme, where it is eligible and the purchaser agrees in writing. Real estate agent commission, marketing and conveyancing come off next.
Land carries transfer duty: at the general Queensland rates, a site over $1,000,000 pays $38,025 plus $5.75 for each $100 above that. Then come the build contract, design and approval fees, a contingency and infrastructure charges, which councils levy under their own charges resolutions, up to a state maximum. In south east Queensland the water business levies its own share within that maximum, so get both figures for the site before signing.
Holding costs run until the last apartment sells. Queensland land tax is assessed on the land held at midnight on 30 June, for the whole financial year, on a taxable value drawn from the site value the state sets, which can differ from the price paid. Council rates run alongside, and finance costs come last: fees, and interest added to the loan monthly, which the loan limit must make room for. Your tax adviser can confirm how GST, the margin scheme, transfer duty and land tax apply to your project.
Twelve apartments through five lender tests
Illustrative example, modelled on a 12 apartment block in south east Queensland and a bank lender. Not a client engagement. Figures exclude GST. Sale prices include it, at one eleventh of each price with no margin scheme. Lender terms are our assumptions unless the APRA standard is named.
The property developer plans to sell 12 apartments at an average $920,000 including GST, $10,036,364 in all without GST, and selling costs of 3.5 per cent of each price leave net revenue of $9,649,964. The site costs $1,500,000, with no GST on the purchase, plus $66,775 of duty and $20,000 of legal and purchase costs. The build contract is $5,100,000 over 14 months from August 2027, with a 5 per cent contingency, $420,000 of design and approval fees and infrastructure charges assumed at $24,000 an apartment. Settling in January 2027 and selling the last apartment in January 2029, the developer holds the site at midnight on 30 June 2027 and 30 June 2028: two years of land tax at the company rate on an assumed taxable value of $1,100,000, $28,400 in all, plus $16,000 of council rates.
APRA Prudential Standard APS 112, in force from 1 July 2025, sets the risk weights that decide how much capital a bank or other authorised deposit taking institution on the standardised approach must hold. A residential development loan takes a risk weight of 100 per cent if, among other conditions, total debt is below 75 per cent of qualifying development costs and, where lending on one development exceeds $5 million, qualifying pre-sales at least equal total debt. Otherwise it takes 150 per cent, which needs half as much capital again. A loan outside the conditions is still allowed, and lenders that are not authorised deposit taking institutions, such as private credit funds, are outside the standard.
Our illustrative bank lends only within those conditions, counting interest and fees as development costs and pre-sales net of GST. It also caps the loan at 60 per cent of the value on completion excluding GST, wants an 18 per cent margin on cost, and charges 8.5 per cent a year, added to the loan monthly, with a 1 per cent establishment fee. Interest of $288,000 and the $60,218 fee take total development cost to $8.04 million and leave profit of $1.61 million.
Margin on development cost: 20.0 per cent, above the 18 per cent the bank wants.
Loan to value and loan to cost: value sets the limit at $6.02 million, which is 74.9 per cent of cost, just inside the 75 per cent line.
Pre-sales covering the debt: eight apartments sold off the plan, worth $6.69 million net of GST, cover the loan 1.11 times. On 29 June 2026 APRA proposed lowering this condition to 50 per cent of total debt from 1 April 2027; a bank keeping only to that line would then need four pre-sales here. APRA had not finalised it when we checked on 28 October 2026.
Interest through the build: the limit holds all $288,000 of interest, from the first draw in August 2027 until the pre-sales settle in October 2028, so none is paid in cash.
Equity before the first draw: $8.04 million of cost less the $6.02 million loan leaves $2.02 million to spend first, on the site, duty, fees and about three quarters of the first month of the build.
Now suppose the off-the-plan campaign sells 5 per cent below the feasibility, at an average $874,000. Net revenue falls by $482,000 and the margin to 14.4 per cent, below the test. Because value sets the loan, the limit drops to $5.72 million and the equity required rises to $2.29 million, $271,000 more. At those prices the project passes the 18 per cent test only if the site costs no more than $1,270,000, $230,000 below the agreed price. That ceiling is the number to know before signing.
When the senior loan falls short
Development funding comes in layers: senior debt, repaid first and in our example the cheapest; mezzanine, a second loan repaid after it at a higher price; and equity, repaid last, which carries the profit or the loss.
Suppose the developer has $1.5 million, $519,000 short of the equity the bank wants first. Mezzanine at an assumed 16 per cent a year and a 2 per cent fee would cost $140,000 and fail both tests our illustrative bank sets: the APRA standard counts every debt facility the borrower holds against the property, so total debt would reach 81.6 per cent of cost, and the margin would fall to 17.9 per cent. Mezzanine works only behind a lender that allows it, on a margin that can carry it. An equity partner putting in $519,000 for an assumed quarter of the profit leaves both tests as they were, takes $402,000 if the project runs to plan and shares any loss. At the lower prices neither route fixes a margin of 14.4 per cent, so the answer lies in the site price or the build cost.
Common questions
What margin on cost will a lender want to see?
Each lender sets its own. The APRA standard ties the capital a bank holds to debt and pre-sale conditions and sets no margin, and we know of no published benchmark across lenders. Our example assumes 18 per cent. Test the feasibility against your own term sheet, and again at a lower sale price.
Why does a lower sale price raise the equity I need?
When value caps the loan, a lower price lowers the loan while most costs stay put, and the developer funds the difference. In the example, prices 5 per cent lower cut the loan by $301,000 and raised the equity by $271,000, the gap being interest and fees saved on the smaller loan.
When should the feasibility go to a lender?
Send it before the site contract goes unconditional, while you can still renegotiate or walk away. Take the feasibility and its assumptions, the approval or the path to it, the build contract or a priced estimate, the pre-sale plan and evidence of the equity.
Once the project starts, our article on development cash timing covers the weeks between drawdowns and settlements, and the lender view of business accounts covers the accounts behind the project. Our break-even and margin of safety tool shows how far revenue can fall before profit runs out, and our page for property developers sets out how we work on a feasibility and the case for finance.
Book a discovery call to work through the feasibility and finance case for your next site on your own figures.
Sources: Queensland Revenue Office, Transfer duty rates (updated 25 June 2026), New to land tax and Land tax threshold and rates for companies and trusts (updated 29 November 2024); Australian Taxation Office, Building and construction, residential premises (updated 10 July 2020), GST at settlement, a guide for suppliers and their representatives (updated 14 October 2026) and GST and the margin scheme (updated 19 August 2021); Queensland Government planning website, Infrastructure charges (updated 7 June 2024); Australian Prudential Regulation Authority, Prudential Standard APS 112 Capital Adequacy: Standardised Approach to Credit Risk (in force from 1 July 2025) and Getting the balance right on financial resilience, workstream 1: credit risk capital (consultation released 29 June 2026). All checked 28 October 2026.
